Add Posiflex Rear Touch screen

Add Posiflex Rear Touch screen

Posiflex Rear Touch Installation

  1. Turn Off Posiflex.

  2. Attach and connect rear display screen to Posiflex.

  3. Run cables (VGA and USB) through stand.

  4. Connect rear display cables.

  5. Turn Posiflex On.

  6. Hit F2 as soon as it boots to go into the bios.

  7. Once in bios, scroll over to the Intel tab across the top.

  8. Scroll down to “CRT – 12v output” and enable it.

  9. Hit F10 and then Enter to save and exit and the Posiflex will reboot.

10. Verify that the rear screen is getting power and lighting up. If not

repeat steps 1-9.
11. Once back to desktop go Control Panel and go in to Display.
12. On the left side of the window choose Adjust Resolution.
13. Under Multiple Displays choose “Extend these displays”.
14. Above where it shows 2 blue windows (1 & 2), touch window number 1.

Then click OK and Keep Changes.
15. Navigate to C://Setups/Drivers/Posiflex Rear Touch Screen/

(if not available drivers can be obtained at

https://www.dropbox.com/s/iq00j0z7lkds33p/Posiflex%20Rear%20T

ouch%20Drivers.zip?dl=0 )
16. Go into the eGalaxTouch Folder and run the Setup application. 17. Click Next through the installer. It will close automatically when

finished.
18. Connect a keyboard.
19. Open the PC Touch shortcut on the desktop and click on “Monitor

Mapping”.
20. Hit the space bar on the keyboard.
21. Tap anywhere on the rear display.
22.Go to the settings tab of the PC Touch utility.
23. Uncheck Beep on touch.
24. Click on the bar that says “Desktop Mode” until it says “Normal Mode”

and then click OK.

    • Related Articles

    • Add Menu Items

      Adding Menu Items and Modifiers To add a new menu item, you’ll need to be in the back office program under Start > All Programs > Digital Dining > Office. Login with your username (usually your last name) and password (the 4 digit pin you use to ...

    • Transfer an authorization

      Login as a manager and at the top of the screen touch “Adjust Payment” Touch “Check” and type in the check number and hit “Enter” Highlight the payment on the left side of the screen and touch “Delete” Touch “Return to Order” and then touch “Check ...

    • PAX S300 - Instructions to Set ECR COMM Type (Digital Dining w/ Heartland Processor)

      Instructions to Set ECR COMM Type on PAX 300 (Digital Dining w/ Heartland Processor) Touch Menu (Func+1) Enter password 916860 Scroll down to Communication Options Enter password 916860 Touch Option ECR TYPE Set to Option 4 Ethernet Click Enter for ...

    • Ipod POS.ini Settings

      [POS] TimerOrRegister=Register Register=HANDHELD Timer= POSDeviceType=HANDHELD CDVerify=BOTH ScalePort=None ScalePortSettings=9600,E,7,2 Pole Display=None FastScreen=PREP End of Day Reboot=YES PrepScreenDelay=5 NumberOfPrepDisplays=4 OPOS MSR=None ...

    • How to install new POS station for Digital Dining

      Install New POS Station Connect all cables: Plug in the power cable to the base of the terminal along with metal piece with screw to hold cable in place. Connect the printer cable to COM2 and plug the Ethernet cable into LAN1. Power On: Push the ...