Escape portico app in A920/A35 for devices using dedicated device mode.

Escape portico app in A920/A35 for devices using dedicated device mode.

All new A920 and A35 devices come in dedicated device mode which does not allow a user to escape the portico app for the purposes of troubleshooting wifi other functions. To get out of that mode use the following instructions:

  1. Hit the four corners of the screen in a clockwise fashion. Top left, top right, bottom right, bottom left, top right, etc.
  2. Enter password 916860
  3. Scrolls down to exit
    • Related Articles

    • Heartland Admin Portal - Multi-Factor Authentication User Guide - Device Login Procedures

      Multi-Factor Authentication User Guide Device Login Procedures Once you log into the Admin Console, you can acquire a Device Login authentication code, which you can then use to log into the POS, KDS, and Kiosk apps. There are two methods of ...
    • PAX A920 - Get out of stand alone mode

      Video attached Exit to A920 desktop Go to Portico app Scroll to settings Password 916860 System Settings Scroll to ECR-Terminal Integration Mode Set external POS Back to main screen and you should be in normal operation
    • PAX S300 - Batch Device

      Batch Device Function + 1 Touch Menu 916860 enter Host Settings Arrow down to batch close Enter
    • Enabling and Using Waitlist

      Enabling Waitlist To enable waitlist go to ☰ > Manager > Enable Waitlist. This setting is iPad specific and only works in Table Layout rooms. Once enabled you will see the list populate on the right of your table layout rooms. This is a single shared ...
    • How to Put a Star SP700 Printer into Epson Mode for use with QSR Automation

      Setting Up the Printer Turn off the power to the printer and unplug it. Flip it upside down. Unscrew the panel on the bottom. (This will require a Phillips head screwdriver.)  Note:  The dip switch panel is smaller than it might appear in these ...