PAX A920 - Connect to wifi

PAX A920 - Connect to wifi

  1. Drag down from top
  2. Select wifi symbol
  3. Select wifi symbol again
  4. More settings
  5. Long hold on the correct wifi network
  6. Enter password 
  7. Check advanced options
  8. Select Ip Settings > DHCP and switch to static
  9. Enter static information below (there is no subnet mask setting)
  10. Save

    • Related Articles

    • PAX S920 Setup Guide

      PAX S920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S920 device to process payments with the Pay at the Table service. This service is only supported by Heartland Payment processing. To ...
    • PAX S300 Setup Guide

      PAX S300 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S300 device to process payments. The S300 terminal is a multilane transaction processing and mobile smart terminal. This service is ...
    • PAX A920 Setup Guide

      PAX A920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX A920 device to process payments. The A920 terminal is an Android based, multilane transaction processing and mobile smart terminal. ...
    • PAX S300 - Clear the database

      Clear the database in the PAX S300: Menu – password: 916860 Down arrow System settings Down arrow Database – 916860 Clear database Are you sure? Yes All
    • Disable sleep on PAX A920

      To disable sleep mode on the PAX A920 go to A920 settings > Display > Sleep > Set to ‘Never’. You can also see a video at https://www.youtube.com/shorts/H0qBjU-YFOg