Exit stand-alone mode on a PAX A920

Exit stand-alone mode on a PAX A920

Video attached
  1. Exit to A920 desktop
  2. Go to Portico app
  3. Scroll to settings
  4. Password 916860
  5. System Settings
  6. Scroll to ECR-Terminal Integration Mode
  7. Set external POS
  8. Back to main screen and you should be in normal operation

    • Related Articles

    • Exit the Portico app on a PAX A920 or A35

      All new A920 and A35 devices come in dedicated device mode which does not allow a user to escape the portico app for the purposes of troubleshooting wifi other functions. To get out of that mode use the following instructions: Hit the four corners of ...

    • Disable sleep on a PAX A920

      To disable sleep mode on the PAX A920 go to A920 settings > Display > Sleep > Set to ‘Never’. You can also see a video at https://www.youtube.com/shorts/H0qBjU-YFOg

    • Set up a PAX A920

      PAX A920 Setup Guide Overview This article describes how to configure a Genius network to use the PAX A920 device to process payments. The A920 terminal is an Android based, multilane transaction processing and mobile smart terminal. This service is ...

    • Turn on training mode

      Training mode lets new staff practise on a live terminal without touching real money or real data. Steps On the Room screen, tap Options, then Settings. Tap General. Under Device Options, turn on the Training Mode switch. What changes While the ...

    • Clear the database on a PAX S300

      Clear the database in the PAX S300: Menu – password: 916860 Down arrow System settings Down arrow Database – 916860 Clear database Are you sure? Yes All