PAX S300 - Progam IP address

PAX S300 - Progam IP address

How to program the IP address on a Heartland PAX - EMV Reader: 

  1. “Menu” (Func+1)
  2. Password 916860
  3. Scroll down to Communication
  4. Password 916860
  5. Scroll to LAN Parameters
  6. Option 1 (LAN Type) and choose Static
  7. Option 2 (IP Address) which will show the IP address. You should have to just erase the last 3 digits and put in the correct IP in 3 digit format. 

192.168.x.xx on a pax has to be entered as 192.168.00x.0xx. Once entered hit green button to save. 
Then press red button until back to the default screen.

    • Related Articles

    • PAX A920 Setup Guide

      PAX A920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX A920 device to process payments. The A920 terminal is an Android based, multilane transaction processing and mobile smart terminal. ...

    • PAX S920 Setup Guide

      PAX S920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S920 device to process payments with the Pay at the Table service. This service is only supported by Heartland Payment processing. To ...

    • Remotely setting static IP on Star Printer

      Remotely setting static IP on Star Printer All steps must be completed from a phone or iPad on the same network as the printer. Thermal Printer Printing current network configuration Turn off the printer at the switch Hold down the feed button, then ...

    • PAX S300 - Clear the database

      Clear the database in the PAX S300: Menu – password: 916860 Down arrow System settings Down arrow Database – 916860 Clear database Are you sure? Yes All

    • PAX A920 - Connect to wifi

      Drag down from top Select wifi symbol Select wifi symbol again More settings Long hold on the correct wifi network Enter password  Check advanced options Select Ip Settings > DHCP and switch to static Enter static information below (there is no ...