PAX S300 - Edit Sounds

PAX S300 - Edit Sounds

Sounds in the S300

Key Sounds:

  1. Press Menu or FUNC + 1 
  2. Enter Password 916860
  3. 3 for Operation Settings
  4. 1 for Buzzer setup
  5. 1 for Key Tone
  • 1 for OFF
  • 2 for ON

Swipe Sound:

  1. Press Menu or FUNC + 1 
  2. Enter Password 916860
  3. 3 for Operation Settings
  4. 1 for Buzzer Setup
  5. 2 for Swipe Tone
  • 1 for OFF
  • 2 for ON

EMV Beep:

  1. Press Menu or FUNC + 1 
  2. Enter Password 916860
  3. 3 for Operation Settings
  4. 1 for Buzzer Setup
  5. 3 for Card Remove Beep
  • 1 for No Beep
  • 2 for One Beep
  • 3 for Continuous Beep

    • Related Articles

    • PAX S300 Setup Guide

      PAX S300 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S300 device to process payments. The S300 terminal is a multilane transaction processing and mobile smart terminal. This service is ...

    • PAX S920 Setup Guide

      PAX S920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S920 device to process payments with the Pay at the Table service. This service is only supported by Heartland Payment processing. To ...

    • PAX A920 Setup Guide

      PAX A920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX A920 device to process payments. The A920 terminal is an Android based, multilane transaction processing and mobile smart terminal. ...

    • PAX S300 - Clear the database

      Clear the database in the PAX S300: Menu – password: 916860 Down arrow System settings Down arrow Database – 916860 Clear database Are you sure? Yes All

    • Disable sleep on PAX A920

      To disable sleep mode on the PAX A920 go to A920 settings > Display > Sleep > Set to ‘Never’. You can also see a video at https://www.youtube.com/shorts/H0qBjU-YFOg