PAX S300 - Factory Reset

PAX S300 - Factory Reset

S300 Factory Reset

  1. Power cycle the terminal
  2. During the self-test, press the Func key then press cancel
  3. From the menu that is displayed, choose "Remote Download"
  4. Choose "New Download"
  5. Next choose the communications method, use TCP/IP
  6. In the remote IP, enter “216.238.144.195”
  7. Enter “8582” for the port number
  8. Enter the terminal ID 30030030
  9. Choose Yes if "Auto get local IP address (DHCP)" prompted
  10. Power cycle the terminal
  11. During the self-test, press the Func key then press cancel
  12. From the menu that is displayed, choose "Remote Download"
  13. Choose "New Download"
  14. Next choose the communications method, use TCP/IP
  15. In the remote IP, enter “216.238.144.195”
  16. Enter “8582” for the port number
  17. Enter the terminal ID 30030040
  18. Choose Yes if "Auto get local IP address (DHCP)" prompted

*Reboot one last time, just like a normal reboot.

    • Related Articles

    • How to: Factory Reset the Epson TM-U220 printer

      Reset the printer to factory defaults to wipe any existing configurations. Turn the printer OFF   Turn the printer upside down   Locate the Network Adapters on the rear underside of the printer. The small black dot below or above the yellow label is ...
    • PAX S300 Setup Guide

      PAX S300 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S300 device to process payments. The S300 terminal is a multilane transaction processing and mobile smart terminal. This service is ...
    • PAX S920 Setup Guide

      PAX S920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX S920 device to process payments with the Pay at the Table service. This service is only supported by Heartland Payment processing. To ...
    • PAX A920 Setup Guide

      PAX A920 Setup Guide Overview This article describes how to configure a Heartland Restaurant network to use the PAX A920 device to process payments. The A920 terminal is an Android based, multilane transaction processing and mobile smart terminal. ...
    • PAX S300 - Clear the database

      Clear the database in the PAX S300: Menu – password: 916860 Down arrow System settings Down arrow Database – 916860 Clear database Are you sure? Yes All